Samsung SCX-8030ND Series - Port; Capture Log; Toner Save; System Recovery

4.Servi
c
4.6.4. Port
T
his function enables/disables remote connections t
o
SMB(samba) protocol.
This function can be used when there is a problem t
• Service Functions > Port
4.6.5. Ca
p
ture Lo
g
This
function
can
be
used
when
there
is
a
problem
t
when there is a need for developers to upload appli
c
Since enablin
g
those ports can creates a risk of dam
administrator of the customer site is necessary. The
enable/disable the services.
pg
• Service Functions > Capture Log
This function copies all the saved lo
g
in the system
t
a USB memory needs to be plu
gg
ed into the syste
m
1GB. If the system lo
g
size become considerably hu
g
memory.
4.6.6. Toner Save
This function reduces the use of toner up to 30% an
d
• Service Functions > Toner Save
4.6.7. Count Setting of Large P
a
• Service Functions > Count Settin
g
of Lar
g
e
P
This function sets count of lar
g
e pa
g
e, such as A3 a
count. For example, the total use of 100 A4 impres
s
impressions if the configuration is set to
“
1 Count Up
impressions
if
the
configuration
is
set
to
1
Count
Up
configuration is set to “2 Count Up”.
4.6.8. System Recovery
• Service Functions > System Recovery
This function repairs or format the HDD of the syst
e
saved in a USB memory, and that USB memory nee
d
From the system recovery UI, Choose “SYS” to rec
o
to recover all the partition of the HDD.
When the system recovery UI is appeared after reb
o
data in the selected partition or choose “HDD Form
a
The password of this mode is 1934
Service Manual
SCX-8030/8040 series
4-
4
The
password
of
this
mode
is
1934
.
c
e Mode
o
the system via telnet, OSGI command shell, and
hat requires developers to access the system or
hat
requires
developers
to
access
the
system
or
c
ations for a test.
a
g
in
g
data stored in the device, a
g
reement of the
user must lo
g
in as the administrator to
t
o a UBS memory as a zip file. To use this function,
m
. Note that the size of system lo
g
could reach up to
g
e, it will take lon
g
er time to copy to the plu
gg
ed
d
only applies to monochrome printing.
a
ge
P
a
g
e
nd led
g
er size, to 1 count or 2 count of the total
s
ions and 100 A3 impressions will become 200
p
”
while the total will be 300 impression if the
p
while
the
total
will
be
300
impression
if
the
e
m. To use this function, a HDD ima
g
e need to be
d
s to be plu
gg
ed in the system before the execution.
o
ver only the system partition of the HDD or “ALL”
o
ot, choose “HDD Repair” to repair any corrupted
a
t” to format the data in the selected partition.
SAMSUNG ELECTRONICS
Version 0.05
4
1