Samsung SCX-8030ND Series - TR Control Mode

4.Servi
c
4.6.10. TR Control Mode
• Service Functions > TR Control Mode
Purpose To correct transfer related probl
e
transfer value to o
p
timize ima
g
e
pg
Operation
Procedure
1. TR Control Mode
• Choose the paper group, p
a
•
A
djust PWM value based o
n
 Blur : Increase PW
M
 Poor Transfer : Incr
e
 Re-transfer : Decre
a
 White Spot : Decre
a
 OPC Cyclic Ghost :
Blur
White Spot
2. Blur Upgrade Mode : Turn on
3. OHP Upgrade Mode : Turn o
n
Note that this option needs to b
e
OHP printing. Most of OHP type
Verification Print out a test job and make su
r
White
Spot
Specification N/
A
Reference N/A
Service Manual
SCX-8030/8040 series
4-
4
c
e Mode
e
ms. This function can be used to change the
q
ualit
y
to a certain t
yp
e of
p
a
p
er.
qy yppp
a
per side, and paper direction.
n
the problem type.
M
value
e
ase PWM value
a
se PWM value
a
se PWM value
Decrease PWM value
Poor Transfer
Retransfer
OPC Cyclic Ghost
the mode when black lines becomes blur.
n
the mode when transfer on OHP becomes poor.
e
turned on only if there is a transfer problem in
s can be used without this option turned on.
r
e the transfer problem has resolved.
OPC
Cyclic
Ghost
SAMSUNG ELECTRONICS
Version 0.05
4
3