Samsung SCX-8030ND Series - Error Code Details

7.Trouble
s
● Code :
A1-1113
● Error message :
A
ctuator Motor Failu
7.2.2 Error Code Details
● Symptom / Cause :
Main BLDC motor does not operate.
● Troubleshooting method :
1 Enter the diagnostic mode Select the test routine
1
.
Enter
the
diagnostic
mode
.
Select
the
test
routine
.
Execute the Main BLDC motor test. If the motor do
e
2. Remove the rear cover.
3. Check if the main drive motor connector is connect
e
If the problem persists, replace the main drive moto
Main BLDC (MP/REGI/DUPLEX)
● Replacement part
- JC31-00123B (MOTOR BLDC)
Service Manual
SCX-8030/8040 series
7-
1
s
hooting
re #A1-1113: Turn off then on.
e
s not work, turn the machine off.
e
d properly. Reconnect it.
r.
SAMSUNG ELECTRONICS
Version 0.05
1
2