Samsung SCX-8030ND Series - Page 307

7.Trouble
s
● Code :
A1-2111
A1-2113
● Error message
A
ctuator Motor Fail
u
A
ctuator Motor Fail
u
● S
y
mptom / Cause :
y
1. OPC BLDC motor is broken.
2. The relative connector is disconnected.
3. Deve joint board and main board are defective.
● Troubleshooting method :
1. Enter the diagnostic mode. Select the test routine.
Execute the OPC BLDC motor test. If the motor do
2. Remove the rear cover.
3. Check if the OPC drive motor connector is connec
t
If the problem persists replace the OPC BLDC mo
If
the
problem
persists
,
replace
the
OPC
BLDC
mo
BLDC
4. If the problem persists, replace the imaging unit.
5. Replace the toner connector board or Engine boar
d
● Replacement part
JC31-00123A : MOTOR BLDC
JC92-02302A : PBA-ENGINE (SCX-8030ND)
JC92-02221A : PBA-ENGINE (SCX-8040ND)
JC92-02339A : PBA-TONER CONNECTOR
Service Manual
SCX-8030/8040 series
7-
1
s
hooting
:
u
re #A1-2111: Call for service if the problem persists.
u
re #A1-2113: Call for service if the problem persists.
es not work, turn the machine off.
t
ed properly. Reconnect it.
tor in the main drive unit
tor
in
the
main
drive
unit
.
(OPC/DEVE)
d
.
SAMSUNG ELECTRONICS
Version 0.05
1
4