Samsung SCX-8030ND Series - Page 421

7.Trouble
s
Otherwise, adjust the DADF using the screw at the ba
below. For example, the length of scale on the left sid
e
steel plate toward the rear side by two scale marks us
scale mark is approximately 0.5 mm.
Service Manual
SCX-8030/8040 series
7-1
s
hooting
ckside and handle hinge as shown by the examples
e
is 1mm shorter than that of right side, move the
ing the screw at the backside and handle hinge. A
SAMSUNG ELECTRONICS
Version 0.05
28