Samsung SCX-8030ND Series - Registration Unit

2. Product
D
The registration roller is driven by the registration mul
t
between the registration roller and the registration mu
l
roller in order to match paper and an image on the dru
2.4.6 Registration unit
roller
in
order
to
match
paper
and
an
image
on
the
dru
ROLLER-
R
JAM REMOVAL
LEVER
Specification
RE
G
Specification
•Skewin Simplex
-. Top Skew : 2.0mm/241.3mm ( Option : 2.5m
m
-. Side Skew : 1.5mm/180.5mm ( Option : 2.0m
• Skew in Duplex
-. Top Skew : 3.0mm/241.3mm ( Option : 3.5m
m
-. Side Skew : 2.3mm/180.5mm ( Option : 2.5
m
• Dog Ear, Trees, Nicks, Wrinkling
-. Plain Paper : 1/5,000
-. Special Media : 1/1,000
•
Margin
Margin
-. Top Margin : 4.23 ± 2 mm ( Tray3, 4, HCF :
-. Left / Right Margin : 3 ± 2 mm ( Tray3, 4, H
C
-. Duplex Top Margin : 4.23 ± 2.5 mm ( Tray3
-. Duplex Side Margin : 3 ± 2.5 mm ( Tray3, 4
Service Manual
SCX-8030/8040 series
2-
2
2-
2
D
escription
t
i motor. The registration clutch (CL6) is located
l
ti motor, and it controls ON/OFF of the registration
um at the predetermined registration point
um
at
the
predetermined
registration
point
.
SHAFT-REGI
R
EGI
G
I SENSOR
m
/241.3mm )
m/180.5mm )
m
/241.3mm )
m
m/180.5mm )
4.23 ± 2.5 mm )
C
F : 3 ± 2.5 mm )
, 4, HCF : 4.23 ± 3.0 mm )
, HCF : 3 ± 3.0 mm )
SAMSUNG ELECTRONICS
Version 0.05
2
7
2
7