Samsung SCX-8030ND Series - Page 76

2. Product
D
The Video Controller adopts the SPGPv4 800Mhz, 51
2
jobs successfully. The Video Controller also communi
c
Controller to display some of the system information.
The USB HUB Controller interfaces with the Video Co
such as USB memory sticks and Authentication devic
e
The OPE Controller displays the status of the system
u
actions or the Video controller.
The Scan Controller scans images using the Platen o
r
The DADF Controller controls some mechanisms req
u
communicates with the Scan Controller to s
y
nchroniz
e
y
the scanning data to the Video Controller through the
P
A
MICOM at the Engine Controller activates each Co
n
optimized energy-saving algorithm for optimal efficien
c
side is used to safely shut down the system power. It i
Service Manual
SCX-8030/8040 series
2-
6
D
escription
2
MB Memory and a 250GB HDD to perform these
c
ates with the OPE Controller through the USB HUB
ntroller, the OPE Controller, and some USB Devices
e
s such as Common Access Card readers.
u
sing WSVGA TFT LCD in response to user
r
the DADF.
u
ired to scan by feeder continuously and
e
the scannin
g
timin
g
. The Scan Controller transfers
gg
P
CIe high speed bus.
n
troller’s power and turns off power according to an
c
y. The soft Power Switch in the OPE Controller left-
s controlled by the MICOM.
SAMSUNG ELECTRONICS
Version 0.05
6
0