Media and tray_ 41
4. Load the paper in the left side of the tray with the print side facing up.
The left side of the tray can hold up to 1,000 sheets of plain paper.
• Do not overload the tray. Otherwise, it may cause paper jams.
Make sure that the paper is below the maximum paper
capacity guide inside the tray.
• If the paper in the right side has run out, the guide
automatically pushes the paper in the left side to right side
automatically.
5. Insert the tray back into the high capacity feeder.
When you print a document, set the paper type and size for the tray.
For information about setting the paper type and size on the control
panel (see
"Tray setting" on page 47).
To Next Page
Loading...
