Setting up the hardware_ 11
Unpacking and placing the hardware
Follow the steps below:
1. Select a stable location.
2. Unpack the machine and check all the enclosed items. Included items may differ depending on the country
3. Remove all the tapes.
• Make sure that yellow, magenta, cyan and black toner cartridges are enclosed.
• Make sure that yellow, magenta, cyan and black imaging units are enclosed.
• If any items are missing or damaged, notify your dealer immediately.
• The appearance of the power cord may differ depending on your country’s specifications. The power cord must
be plugged into a grounded power socket.
TONER CARTRIDGE IMAGING UNIT
POWER CORD & USB CABLE INSTALLATION GUIDE & WARRANTY CARD
SOFTWARE CD & USER’S GUIDE CD RUBBER PACKING(2)
CLX-9252/9352 Series
SCX-8230/8240 Series
CLX-9252/9352 Series
SCX-8230/8240 Series
install_guide_english.book Page 11 Saturday, July 21, 2012 4:53 PM
To Next Page
Loading...
