Setting up the hardware_ 13
Removing the scanner locking screw
You need to remove the screw locking the scanner. If you do not remove it, you cannot use the copy and scan functions.
We recommend you keep the screw in the accessory box. You need to lock the scanner when moving the machine
or when the machine is not in use for a long time.
Putting the rubber packings
If you need to install the optional standard finisher or booklet finisher, do not put the rubber packings in the holes.
install_guide_english.book Page 13 Saturday, July 21, 2012 4:53 PM
To Next Page
Loading...
