Initial settings and testing of the machine_ 48
3. Press Machine Setup from the display screen.
4. Press Machine Setup > General Settings > Machine Test.
5. Press ID’s input area. The pop-up keyboard appears.
Enter the name which is entered in the initial setting step 6 (See "Press the Name input area." on page 37).
Then press OK on t
he pop-up keyboard.
You can also select the ID pressing Recent
users.
6. Press
Password’s input area. The pop-up keyboard appears.
Enter the password which is entered in the initial setting step 6 (See "Press the Name input area." on page 37).
Then press OK on t
he pop-up keyboard.
7. Press
Domain’s input area. The pop-up keyboard appears.
Press L, O, C, A, L and press OK on the p
op-up keyboard.
You can also select the domain name pressing Dom
ain List.
The domain name may differ for your machine depending on its options or models.
8. Press
OK.
install_guide_english.book Page 48 Saturday, July 21, 2012 4:53 PM
To Next Page
Loading...
