Setting up the hardware_ 7
Installation environment
Make sure to have the below recommended environment before you install the machine.
• Range of temperature
- Operatio
n: 10 and 32 °C (50 and 90 °F)
- Stor
age: -20 and 40°C (-4 and 104 °F)
• Range of
humidity
- Operatio
n: 20 and 80% RH
- Stor
age: 10 and 90% RH
• Select a level, stable, vibration-free surface on which to install the machine.
• Select an area with adequate air circulation.
• Avoid areas near windows, with exposure to direct sunlight, or sources of heat and air conditioning.
• Avoid areas of high humidity and with possible exposure to dust or moisture (e.g, rain).
• Allow extra space to open doors and trays.
• Place the machine on a flat, stable surface in order to avoid tilting the machine more than 5 mm (0.20 inch). Printing
quality may be affected if the machine is tilted too much.
install_guide_english.book Page 7 Saturday, July 21, 2012 4:53 PM
To Next Page
Loading...
