Samsung series 7 7000 - Page 33

5. IftheSecurity/PINpop-upappears,gotoStep6.Ifthe
NetworkConnectingScreenappears,gotoStep10.
6. PresstheAorTbuttontoselectSecurityorPIN.For
mosthomenetworks,youwouldselectSecurity(for
SecurityKey).TheSecurityScreenappears.
7. OntheSecurityscreen,enteryournetwork'sPass
Phrase.
YoushouldbeabletofindthePassPhraseon
oneofthesetupscreensyouusedtosetupyour
routerormodem.
8. ToenterthePassPhrase,followthesegeneral
directions:
- Pressthenumberbuttonsonyourremotetoenter
numbers.
- Usethedirectionbuttonsonyourremotetomove
frombuttontobuttonontheSecurityKeyscreen.
- PresstheRedbuttontochangecaseordisplay
symbols/characters.
- Toaenterletterorsymbol,movetotheletteror
symbol,andthenpresstheENTERIZ_button.
- Todeletethelastletterornumberyouentered,press
theGreenbuttononyourremote.
9. Whendone,presstheBluebuttononyourremote.The
NetworkConnectingscreenappears.
10.Waituntiltheconnectionconfirmationmessageis
displayed,andthenpresstheENTERI_button.The
NetworkSetupscreenre-appears.
11.Totesttheconnection,presstheRETURNbuttonto
selectNetworkTest,andthenpresstheENTERI_
button.
Network Setup (Ad-Hoc) ....................................................................................................................
You can connect to a mobile device without an access point
through the "Samsung Wireless LAN Adapter" by using a
peer to peer network.
This function is available when SWL (Samsung
Wireless Link) is set to Off.
How to connect to new Ad-hoc device
1. Follow Steps 1 through 6 in the "How to set up using
PBC (WPS)" (p. 32).
2. Choose Select a network, A list of devices/networks
appears.
3. While in the device list, press the Blue button on the
remote.
The message The existing network system
may have limited functionality. Do you want to
change the network connection? is displayed.
4. Input the generated Network Name (SSID) and
Security Key into the device you want to connect.
How to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the "How to set up using
PBC (WPS)" (p. 32).
2. Choose Select a network, The Device/Network list
appears.
3. Select the device you want in the Device list.
4. Ifsecurity key is required, input the security key.
If network doesn't operate normally, check
the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.
English 33