6. If the TV is resting on a table or a metal or glass rack, attach the Holder to the wall behind the TV.
Make sure to stretch the Holder cord tight.
N
N Use an M5 x 35 or larger screw.
Anchor
N Install the TV close to the wall so that it does not fall.
N
slanted downwards for safety purposes.
N Check the cord occasionally to make sure it is secure.
N
7. Verify all connections are properly secured. Periodically check the connections for any sign
of fatigue or failure. If you have any doubt about the security of your connections, contact a
professional installer.
English - 20
SERIF_ZA_BN68-07855U-00_ENG.indb 20 2016-06-10 �� 8:57:08
To Next Page
Loading...
