M
AINTENANCE
8.13
8
Replacing the ADF Rubber Pad
You can purchase a ADF rubber assembly from a Samsung
dealer or the retailer where you bought your machine.
1
Open the control panel by gripping it on the bottom edge
and pulling it.
2
Disconnect the support on the left side of the machine from
the control panel and lift the control panel up to the
complete open position.
3
Remove the control panel from the machine by
disconnecting the hinge on the right.
NOTE
:
Be careful not to disconnect the connector on the control
panel from the machine as it turns the LCD off.
To Next Page
Loading...
