T
ROUBLESHOOTING
9.4
In the Paper Tray
1
Open and close the front cover. The jammed paper
automatically exits the machine.
If the paper does not exit, continue to step 2.
2
Pull the paper tray open.
3
Remove the jammed paper by gently pulling it straight out.
If there is any resistance and the paper does not move
when you pull or if you cannot see the paper in this area,
skip to the fuser area around the toner cartridge. See
page 9.6.
4
Insert the paper tray into the machine until it snaps into
place.
5
Open and close the front cover to resume printing.
To Next Page
Loading...
