C
OPYING
4.3
4
Making a Copy
1
Pull the document support all the way out. Fold out the
extender, if necessary.
2 Load the documents up to 20 pages face down into the ADF.
3
Adjust the document guides to the document size.
4
Customize the copy settings including number of copies,
copy size, darkness and original type by using the control
panel buttons. See “Setting Copy Options” on page 4.4.
Sorts the copy job. For example, if you make 2 copies of 3
page documents, one complete 3 page document will print
followed by the second complete document. see page 4.8
To clear the settings, use the Stop/Clear button.
5
Press Start Copy/Fax.
To Next Page
Loading...
