C
OPYING
4.5
4
Original Type
The Original Type setting is used to improve the copy quality by
selecting the document for the current copy job.
To select the document type, press Original Type. Each time
you press the button, the LED labeled with the selected mode
turns on.
You can choose from the following image modes:
• Text: Use for documents containing mostly text.
• Photo: Use when the originals are photographs.
NOTE
: When you copy a document containing color on the
background, such as a newspaper or a catalog, you can get the
background on your copy. If you want to reduce the background,
change the
Darkness
setting to
Light
and/or the
Original Type
setting to
Text
.
Number of Copies
Using the No. of Copies button, you can select the number of
copies from 1 to 99.
1
Press No. of Copies.
2
Press the scroll button (
¥
or
) until the number you want
appears on the display.
Pressing and holding the buttons allows you to quickly
increase and decreases in increments of 5.
You can enter the value using the number keypad.
3
Press Enter to save the selection.
To Next Page
Loading...
