Using the Linux Unified Driver Configurator
179
4. Useful Management Tools
Classes tab
The Classes tab shows a list of available machine classes.
• Refresh: Renews the classes list.
• Add Class: Allows you to add a new machine class.
• Remove Class: Removes the selected machine class.
8
Ports configuration
In this window, you can view the list of available ports, check the status of each
port and release a port that is stalled in a busy state when its owner has
terminated the job for any reason.
• Refresh: Renews the available ports list.
• Release port: Releases the selected port.
1 Shows all of the machine classes.
2
Shows the status of the class and the number of machines
in the class.
1 Switches to Ports configuration.
2 Shows all of the available ports.
3
Shows the port type, device connected to the port, and
status.
To Next Page
Loading...
