Menu functions
Messages
(Menu 5)
81
When the protocol type is
IMAP4
:
-
IMAP4 server
: enter the IP address or
host name of the server that receives your
e-mail.
-
IMAP4 port
: enter the IMAP4 port
number.
-
Same ID and password
: select if you
want to have the same user ID and
password with the outgoing e-mail server.
-
IMAP4 user ID
: enter the IMAP4 user
name.
-
IMAP4 password
: enter the IMAP4
password.
-
Include attachments
: select this option
to receive attachments with e-mails.
-
Email retrieval limit
: set the number of
headers you will retrieve from the server.
•
Email profiles
: set up an e-mail profile and
select a profile to be used.
Current profile
: select a profile.
Profile settings
: configure e-mail profiles
using different e-mail servers. Set the
options for each profile:
-
Profile name
: enter a name for the e-mail
profile.
-
APN
: enter the access point name used for
the GPRS network address.
-
Login ID
: enter the user ID.
-
Password
: enter the password.
-
DNS1
: enter the primary address.
-
DNS2
: enter the secondary address.
•
Block list
: specify e-mail addresses or
subjects you want to reject.
Push message
(Menu 5.5.4)
You can change the settings for receiving push
messages from the wireless web server.
•
Receive
: set how your phone receives push
messages.
To Next Page
Loading...
