Samsung SL-C2670FW - Prepare New Fuser Unit; Replace with New Fuser Unit; Sensor Failure: #C5-1710. Turn off then; Waste Toner Container Is Almost Full. Order New One

4.AlignmentandTroubleshooting
►ErrorCode
C5-1710
►Errormessage
SensorFailure:#C5-1710.Turnoffthenon.
►Symptom
TheITBhomepositionsensorhastheproblem.
►Troubleshootingmethod
1)Turnthemachineoff.ReplacetheITBUnit.
►ErrorCode
C6-1110
C6-1120
►Errormessage
Preparenewfuserunit.
Replacewithnewfuserunit.
►Symptom
Thefuserunitisattheendofitslife.
►Troubleshootingmethod
1)Printthesupplyinformationreport.Checktheliferemainingofthefuserunit.
2)Ifitslifeisattheend,turnthemachineoffandreplacethefuserunitwithnewone.
►ErrorCode
C7-1110
►Errormessage
Wastetonercontainerisalmostfull.Ordernewone.
►Symptom
Thewastetonercontainerisattheendofitslife.
►Troubleshootingmethod
1)Printthesupplyinformationreport.Checktheliferemainingofthewastetonercontainer.
2)Ifitslifeisattheend,turnthemachineoffandreplacethewastetonercontainerwithnewone.
►ErrorCode
C7-1311
►Errormessage
Wastetonercontainerisnotinstalled.Installit.
►Symptom
Thewastetonercontainerisnotinstalled
►Troubleshootingmethod
1)Checkifthewastetonercontainerisinstalledproperly.
2)Removeandreinstallthewastetonercontainer.
4-41Copyright©1995-2016SAMSUNG.Allrightsreserved.