Samsung SL-C2670FW - Fuser Unit

2.Productspecicationanddescription
2.2.4.4.FuserUnit
Thisunitconsistsofahalogenlamp,afuserbelt,aThermostat,andThermistor,etc.Itfusesthetonerthatwastransferredby
thetransferrollerontothepaper,byapplyingheatandpressuretocompletefusingprocess.
1)Thermostat
Whenaheatlampisoverheated,aThermostatcutsoffthemainpowertopreventover-heating.
•ThermostatType:Non-ContacttypeThermostat
•ControlTemperature:195°C±5°C
2)Thermistor
Itisatemperaturedetectingsensor.
•TemperatureResistance:7kΩ(180°C)
3)FusingBelt
Thefusingbeltgetsheatfromthehalogenlampandtransferittotonerandpaper.Thethinfusingbeltreduceswarming
uptimeandmodechangingtime.
4)Pressureroller
Thepressurerollerisarubberrollerwhichensurespropernipwidthbetweenthepressurerollerandfusingbelt.Itis
drivenbythedrivingsystemanddrivesthefusingbelt.
5)HalogenLamp
•V oltage:110V(115±5%)/220V(230±5%)
•Capacity:
-850Watt±45W(110V)
-800Watt±40W(220V)
Copyright©1995-2016SAMSUNG.Allrightsreserved.2-20