Control panel overview
18
1. Introduction
4
Cancel Stops an operation at any time and there are more
functions.
• Cancels the current job.
• Prints demo page: Press and hold this button
for about 2 seconds until the status LED blinks
slowly, and release.
• Supplies Info & Usage Counter: Press and hold
this button for about 6 seconds and release.
• Prints configuration reports/network
configuration reports
d
: Press and hold this
button for about 4 seconds until the status LED
blinks fast, and release.
5
Power You can turn the power on/off or wake the machine
up from the power save mode with this button.
6 Status LED Indicates the status of your machine (see
"Understanding the LED" on page 68).
a. M262xND/M282xND only.
b. M282xDW only.
c. M262x/M262xD only.
d. Network and wireless models only (see "Features by models" on page 6).
To Next Page
Loading...
