Samsung SL-M2885FW - Updating Firmware; Update the Firmware by Using the USB Port; Update the Firmware by Using the Network

4.AlignmentandTroubleshooting
4.1.7.UpdatingFirmware
Thischapterincludesinstructionsforupdatingtheprinterrmware.Youcanupdatetheprinterrmwarebyusingone
ofthefollowingmethods:
•UpdatethermwarebyusingtheUSBport.
•UpdatethermwarebyusingtheNetwork.
4.1.7.1.UpdatethermwarebyusingtheUSBport
Upgradingpreparations
•usblist2.exe:Toolwhichsendsrmwaredatatoprinter.
•Firmwareletoupdate.
UpgradeProcedure
1)Turnthemachineoff.
2)ConnectUSBcabletoprinter.
3)Turnthemachineon.Checkiftheprinteristhereadystatus.
4)DragtheSWUPGRADE_ON.prnleanddropdownontheusblist2.exe.
5)Dragthermwareleanddropdownontheusblist2.exe.
Andthenrmwareupdatewillbestartedautomatically.
6)Whenupgradingiscompleted,machineisautomaticallyre-booting.
4.1.7.2.Updatethermwarebyusingthenetwork
Upgradingpreparations
•WiredorWirelessNetworkconnectionisestablished.
•Firmwareletoupdate
Copyright©1995-2013SAMSUNG.Allrightsreserved.4-22