Basics
33
Using the device as a removable disk for data transfer
Move audio, video, image, or other types of files from the device to the computer, or vice
versa.
Do not disconnect the USB cable from the device when you are transferring files.
Doing so may cause data loss or device damage.
The devices may not connect properly if they are connected via a USB hub. Directly
connect the device to the computer’s USB port.
1
Connect the device to the computer using the USB cable.
2
Open the notification panel, and then tap
Connected as a media device
→
Transferring
media files
.
Tap
Transferring images
if your computer does not support Media Transfer Protocol
(MTP) or not have any appropriate driver installed.
3
Transfer files between your device and the computer.
Updating the device
The device can be updated to the latest software.
Updating over the air
The device can be directly updated to the latest software by the firmware over-the-air (FOTA)
service.
On the Apps screen, tap
Settings
→
About device
→
Download updates manually
.
To automatically download available updates when connected to a Wi-Fi network, tap
the
Download update automatically
switch to activate it.
To Next Page
Loading...
