Disassembly and Assembly
88
4 Using the opening pick, separate the 5G mmWave antenna and connector.
5 Using the tweezers, separate the 5G mmWave antenna from the metal bracket.
•
If the 5G mmWave antenna feels stuck, apply a microwaveable heating bag for
2 minutes to soften the adhesive. When reheating, it should be heated no longer
than 30 seconds.
•
While separating the 5G mmWave antenna module, the metal bracket may be
bent or damaged. You may need to replace the metal bracket with a new one
during reassembly.
Connector
Antenna
Metal bracket
To Next Page
Loading...
