7.
Level
2
Repair
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung
’s
written authorization is
strictly prohibited.
Follow the numbered sequence when you disjoint Be careful not to damage the FPCBs
Be careful not to damage the FPCBs Be careful not to damage the FPCBs
7-1.
Disassembly and assembly Instructions
7-1-1.
Disassembly
Disengage the rear cover with the front
cover by using the hook
1
Separate the
7
PIN I/F connector, TSP
connector, LCD connector from the PBA.
2
3
Release the screw at
2
points
(
Torque:
1.1±0.1
kgf.cm)
4
1
2
3
4
◆blue:L1.5 (2Point)
Open the black thin bar and Separate the
LCD FPCB from the Front.
7 PIN I/F
TSP
LCD
To Next Page
Loading...
