You can send photos or videos stored on the camera via emaik
For information about entering text, refer to "Entering text". (p. 105)
Rotate the mode dial to Wi°Fi.
Select ...................
Select the Sender box, enter your email address,
and then select Done.
, If you have previously saved your information, it will be inserted
automatically. (p. 11I)
, To use an address from the list of previous recipients, select
v -_ an address.
Select the Receiver box, enter an email address,
and then select Done.
, To usean address from the list of previousrecipients,select
V _ an address.
, Select + to add additional recipients. You can input up to
30 recipients.
o Select X to delete an address from the list.
Select Next.
Scroll to files to send, and then press [_].
° Youcan select up to 20 files.The total sizemust be 10 MB or
less.
Select Send.
Select the Comment box, enter your comments, and then
select Done.
Select Send.
, The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device and send the emai!.
, If the camera has not previously been connected to a WLAN,
it will search for available AP devices. (p. 101)
To Next Page
Loading...
