With Windows Vista and Windows 7, the methods for disconnecting the
camera are similar.
Ensure that no data is being transferred between the
camera and the computer.
o If the status lamp on your camera is blinking, it means the data
transfer is in progress. Please wait until the status lamp stops
blinking,
Click _ on the tool bar at the bottom right of your
computer screen.
Connect your camera to a Madntosh computer with the
USB cable.
Click the pop-up message.
Click the message box indicating safely removed.
Remove the USB cable.
Turn on the camera.
, When the pop-up message appears on the camera display,
select Computer.
Open the removable disk.
!_:i Transfer photos or videos to the computer.
To Next Page
Loading...
