- 9 -
USER'S MANUAL
HDMI input, the On Screen Display will show this message.
1. Press the MENU button to see the main menu.
2. Press
/
and ENTER button to select the main
menu.
3. Press
/
and ENTER (or
) button to select the
sub menu.
4. Press
/
and ENTER (or
) button to select
setting. (Or press
/
button to select setting)
5. Press the MENU button to exit.
Mode : Dynamic, Standard, Movie
1. Press the MENU button to select the
Picture menu.
2. Press the ENTER or
button to select the Mode
menu.
3. Press the ENTER or
button.
4. Press the
/
and ENTER button to select the
mode you want. (Dynamic, Standard, Movie )
5. Press the MENU button to exit.
You can return to the factory defaults picture
settings by selecting the "Reset".
1. Press the MENU button to select the
Picture menu.
2. Press the ENTER or
button.
3. Press the
/
button to select the setting you want.
(Backlight,Contrast,Brightness,Sharpness)
Press the ENTER button.
OSD Menu Configurations
USER'S MANUAL
No Signal Display
OSD Menu Selection
NOTE1: Press the
button to return to the
previous screen.
Press the MENU button to exit .
NOTE2: The OSD display will be disapear after 1
minutes if there is no button input.
No Signal
<Video mode>
Picture Menu
Check signal cable
<VGA.HDMI mode>
Picture
Mode : Dynamic
Brightness 45
Sharpness 50
Move Enter Return
Picture
Mode :
Sharpness 50
Move Enter Return
Move Enter Return
Mode : Dynamic
Screen
Picture
SMT-1722-1922-Eng.indd 1:9 2009-7-16 10:56:58
Backlight
Contrast
10
100
Brightness
45
Sharpness
50
Advanced
Settings
Contrast
0
Auto
Adjustment
More
Brightness
00
Movie
Standard
Dynamic
Backlight
Screen
Auto
Adjustment
Advanced
Settings
More
45
Custom : Backlight,Contrast,Brightness,
Sharpness
100
Contrast
Backlight
10
Screen
Advanced
Auto
Adjustment
More
Settings
When there is no connection at the VGA . and Video
To Next Page
Loading...
