English _15
● OVERVIEW
Rear Side
Item Description
a
Micro SD Memory
Card Compartment
Compartment for the Micro SD memory card.
b
Audio terminal
AUDIO OUT Terminal for audio output.
AUDIO IN Terminal for audio input.
c
Video Out Port Analog video output port. (for installation)
d
Reset Button
Resets the camera settings to the default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
INOUT
AUDIO
VIDEO
RESET
ALARM
IN
ACT LINK
NETWORK
DC12V
To Next Page
Loading...
