setup screen
54_ setup screen
OSD Setup
1. Select <OSD>.
2. Select each item and set it properly.
• Camera title : Use alphanumeric
characters in the list and enter a
desired title in the bottom input line.
You can enter up to 15 characters for the
title.
• Camera title position x, y : Specify the coordinates where the camera title is
displayed.
Time OSD Setup
1. Select <Time OSD>.
2. Select each item and set it properly.
• Time display : Specify the use of time
display.
• Date format : Specify the date format
that will be displayed on the screen.
• Time position display X, Y : Specify the position of time.
• Display weekday : Specify whether displays the day of the week on the screen.
Smart codec setup
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1. From the Setup menu, select the
<Audio & Video (
)> tab.
2. Click <Smart codec setup>.
3. Select ROI Area.
• Face Detection : Active if a face is
recognized on the monitoring screen.
M
Face detection is enabled only if the
following conditions are met:
-
The face is positioned at ±45
degrees to the left or right from the top.
-
The effective range of the face rotation is ±30 degrees vertically, and ±60 degrees horizontally.
-
The minimum size of the face is 20x20 based on the resolution of 320x240.
• Manual : Specify the ROI area to monitor manually.
To Next Page
Loading...
