English _55
● SETUP SCREEN
4. Select a quality and detection sensitivity for the ROI area.
5. If manually specifying the ROI area, select a desired area with the mouse pointer and
drag it as much as you want.
You can specify up to 5 distinct areas.
6. To cancel your selection, simply click [
].
7. When done, click [Apply ( )].
J
The Smart codec will not be active if it is set to <Off> in <Video profile>. (page 46)
External PTZ setup
You can change the direction of lens and activate the zoom.
1. Select the <Audio & Video (
)> tab
from Setup menu.
2. Click <External PTZ setup>.
3. Click [Direction Adjustment (
)].
• [Change direction to (
)/( )/
(
)/( )] : Change the direction of
camera lens.
• [Moving speed control ( )] :
The bigger the number is, the faster
the moving speed becomes.
4.
Set the zoom and focus control buttons.
• [Zoom In ( )] : Zooms in the
screen.
• [Zoom Out ( )] : Zooms out the
screen.
• [Adjust Focus ( / )] : Adjusts
the focus in the screen.
• [Zoom Speed Control (
)]
: The bigger the number is, the faster
the zoom speed becomes.
5. Set the preset.
M
The pan/tilt operations will be enabled only if the camera is connected to a pan/tilt-compliant
receiver.
To Next Page
Loading...
