English _67
● SETUP SCREEN
VA / MD
1. From the Setup menu, select the
<Event ( )> tab.
2. Click <VA / MD>.
❖
Motion Detection (MD)
1. Select a motion detection mode.
2. Specify the use of motion detection.
3. Select a sensitivity level of the motion
detection.
Higher the sensitivity is, the smaller
motion is detected.
4. Use the drag-and-drop method to
specify the detection area on the video.
You can specify up to 4 motion detection
areas.
5.
Specify the activation time and activation
condition.
For more information about <Activation
time> and <Action>, refer to “Alarm input”. (page 66)
6. When done, click [Apply
( )
].
To Next Page
Loading...
