Samsung SNOW-1703U - Power Control Commands; Input Source Control Commands

21
Power control
 Function

 
Header Command ID Data length Checksum
0xAA 0x11 0
 
Header Command ID Data length Data Checksum
0xAA 0x11 1 



 Ack
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3  0x11 

 Nak
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3  0x11 "ERR"

Input source control
 Function

 
Header Command ID Data length Checksum
0xAA 0x14 0
 Setting the input source (Set Input Source)
Header Command ID Data length Data Checksum
0xAA 0x14 1 "Input Source"

0x0C Input source At present, supports only reading the input source
status.
0x21 HDMI1
0x23 HDMI2
0x25 DISPLAY PORT
0x60 MagicInfo
0x63 URL Launcher URL Launcher.
0x65 

This model does not support HDMI1 and HDMI2.

MagicInfoMagicInfo function.