Samsung SR-S20 Series - IF THERE IS CLEARANCE BETWEEN FRIDGE DOOR AND FREEZER DOOR, PLEASE FOLLOW THE STEPS.

IF THERE IS CLEARANCE BETWEEN FRIDGE DOOR
AND FREEZER DOOR, PLEASE FOLLOW THE STEPS.
●
First : Please level up the refrigerator.
(The differance can cause, if the floor where installed is uneven)
●
Freezer door is lower than that of
refrigerator
1) Insert a straight driver (-) (
➀
) into hole
of the control lever (➁), rotates it clock-
wisely and level up the balance.
●
Freezer door is higher than that
of refrigerator
1) Insert a straight driver (-) (
➀
) into hole
of the control lever (➁), rotates it
clockwisely and level up the balance.
❇
Not to adjust the clearance by using control lever, Please refer to the next page.
DIFFERANCE OF HEIGHT
DIFFERANCE OF HEIGHT
➀
DRIVER(-)
➀
DRIVER(-)
➁ CONTROL LEVER
➁ CONTROL LEVER
9
DA68-00500P 6/26/02 2:34 PM Page 25