Samsung SR-S2026C - Page 39

@
When
abnormality
on
defrost
sensor
of
Refrigerator
occurs.
{s_insertion of
MAIN-PCB connector(CN30)
normal?
Repair contact badness on
connector(CN30) and un-
inserted part
Replace temperature sensor
Repair the un-inserted
Connecter or contact badness.
Check cold lead, short and
lead touch
ls defrost sensor
forging normal?
x Reference 4--
N
N
MICOM PIN#59 normal?
No defect on PCB and temperature
sensor. Recheck connector contact
badness
@ When abnormality on temperature sensor of freezer occurs
Is insertion of main-PCB
connector{CN30) normal?
Repair contact badness on
connector(CN30) and un-
inserted part.
Replace temperature sensor
Repair the un-inserted
Connecter or contact badness.
Check cold lead, short and
lead touch
Is defrost sensor
forging normal?
x Reference 4 -.-
IS connection
between defrost sensor and
connector normal?
Is voltage input of
MICOM PIN#56 normal?
No defect on PCB and temperature
sensor. Recheck connector contact
badness