EasyManua.ls Logo

Samsung SR-S2026C - Ice Maker Disassembly and Assembly

Samsung SR-S2026C
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10-6)
Disassembly
of
Ice
Maker
k
1.
Pull
out
the
bucket
from
the
freezer.
2.
Disassemble
the
SUPT-ICE
MAKER,
which
fixes
the
ice-maker,
and
the
wire
housing
in
the
rear
of
the
maker.
3.
Disassemble
by
lifting
the
SUPT-ICE
and
FIXER-CASE
in
the
front
of
the
maker
up
(®
direction)
and
pulling
the
ICE-MAKER
KIT
out
to
the
front
(@
direction).(Do
not
disassemble
each
component
of
the
ICE-MAKER
KIT.
Otherwise,
the
setting
value
may
be
changed.)
SUPT-ICE,
MAKER
Wire
housing
10-7)
Assembly
of
Ice-Maker
1.
Fit
the
rear
rising
of
the
ICE-MAKER
KIT
to
the
front
slot
of
the
TRAY
ICE.
2.
Lift
FIXER-CASE
at
the
front
of
the
SUPT-ICE
MAKER
up.
(@
direction)
3.
Place
the
top
rising
of
the
ICE-MAKER
KIT
to
the
slot
of
SUPT-ICE
MAKER
for
insertion.
4.
Push
the
front
of
the
ICE-MAKER
KIT
while
maintaining
the
position.
(Be
careful.
If
you
overpush
the
ICE-MAKER
KIT,
the
fixed
rising
of
the
SUPT-
ICE
MAKER
may
be
damaged.)
5.
When
the
front
of
the
ICE-MAKER
KIT
is
sagging,
it
means
the
assembly
is
not
right.
At
that
case,
perform
the
assembly
again.
FRONT
SLOT
FIXED
RISING
ICE
MAKER
KIT
TOP
RISING

Table of Contents

Related product manuals