English _9
OVERVIEW
PART NAMES AND FUNCTIONS (FRONT)
Part Names Functions
LCD Screen Display the live video or configure the menu settings.
b
STOP Used to stop the playback.
PLAY Used in playback mode.
MENU Used to access the Menu screen or move to the previous menu.
SEARCH This is the function that switches over to the Search mode.
REC Starts or ends the recording.
1~4
Used to select channel numbers directly in the Live Mode, or numbers in the numeric input
mode.
MODE
In Live mode, pressing it will switch the mode to 4-split, PIP, and Auto Sequence in sequence.
Each button press in Search mode will toggle the screen mode between 4-split and single screen.
For the Play Screen mode, refer to “Play”. (page 73)
Direction & Select
Button
Used to change a value or move the cursor up/down/left/right (◄ ►).
Selects a menu item or executes the selected menu.
c
Power Button Used to turn the DVR ON/OFF.
USB Port Connects the USB devices.
Using the LCD screen
Live video output
Display the live video in 4-split mode. You can touch the screen to switch the channel.
If you want to switch the current channel from 4-split mode to single screen mode, press and hold the
channel button.
If the Setup menu is displayed
Tap Menu in Setup mode to move to a desired menu item or to change the settings.
M
You may want to set the duration of screen display for both protecting the LCD panel and saving the power.
(Page 48)
3
2
1
4
MODE
USB
MENU
PLAY
STOP
SEARCH
REC
cb
To Next Page
Loading...
