1 3
5-2 Identifying and disassembling the parts
Samsung Electronics
To remove shelves in the
freezer compartment
• First remove the icemaking
molds. Tilt the shell up at front,
then lift it up pull it out of the
t r a c k s .
To remove bio deodorizer
• While pushing the front end
knob of the bio deodorizer, pull
it downward to disengage.
To remove shelves in the fresh
food compartment
• Hold the shelf by the front and
pull it forward ot of the rack.
To remove storage drawers and
c o v e r s
• Lift up to remove the cover. Pull
the drawer half way out, then
lifting it up, pull it out
c o m p l e t e l y .
c o v e r s
To remove door bins
• While pushing the bin to the
left, lift it up to disengage.
1
2
2
1
To remove shelves in the super fresh
c o m p a r t m e n t
Procedure of disassemble
Procedure of assemble
• Lift up the cover, push the cover to the
right (as shown) until the mounting
hook( 1 ) disengages, then disengage
the other mounting hook ( 2 ) and pull
out the cover.
• Pull the shelf forward until it stops.
then lift it up and pull it out.
• With shelf front raised slightly,
engage, the roller between the rails
and slide it back.
• To repace the cover, first engage the
mounting hook ( 1 ) as shown, then
engage the other hook ( 2 ) and push
i n .
To Next Page
Loading...
