Settings
76
Camera settings menu
Item Description
USB
Select the function to use when you connect the
camera to a computer or printer using a USB cable.
• Auto*: Set your camera to select a USB mode
automatically.
• Computer: Connect your camera to a computer
for transferring files.
• Printer: Connect your camera to a printer for
printing files.
Beep Sound
Select the sound the camera emits when you press
buttons or switch modes. (Off, On*)
Item Description
Imprint
Select whether to display the date and time on your
photos when printing. (Off*, Date, Date & Time)
• The date and time is displayed on the bottom-
right corner of the photo in yellow.
• Some printer models may not print the date
and time.
• If you select Text in
mode, the camera will
not display the date and time.
Auto Power
Off
Set the camera to turn off automatically when you are
not using it. (Off, 1 min, 3 min*, 5 min, 10 min)
• Your settings will not change after replacing
the battery.
• The camera will not automatically turn off when:
- it is connected to a computer or printer
- you are playing a slide show or videos
- you are recording a voice memo
Video Out
Set the video signal output according to your region.
• NTSC*: USA, Canada, Japan, Korea, Taiwan,
Mexico.
• PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, Finland, Germany,
England, Italy, Kuwait, Malaysia, New Zealand,
Singapore, Spain, Sweden, Switzerland, Thailand,
Norway.
* Default * Default
To Next Page
Loading...
