Samsung SVR-940 - Auto Sequence; Status Display

Digital Video Recorder User’s Manual
44
5.4.3 STATUS DISPLAY
Selects information to display on the live screens.
. BRIGHTNESS : Adjusts the screen brightness by changing the values.
. CONTRAST : Adjusts the screen contrast by changing the values.
5.4.2 AUTO SEQUENCE
The live screens are automatically switched in the order of [SVR-450: <CH1 -> CH2 -> CH3 -> CH4 ] / [SVR-
940: <CH1 -> CH2 -> CH3 -> CH4 -> CH5 -> CH6 -> CH7 -> CH8 -> CH9 >] at the predefined switching
interval. The channel switching interval can be set from 1 up to 10 on the [SEQUENCE] menu.
. SEQUENCE : Set it ON for Auto Sequence mode
. SEQUENCE DWELL : Set the screen display duration by channel. The switching interval can be set from
1 up to 10 sec.
. ORDER : Select the channels for Auto Sequence.
. USER DEFINE : Select the display channels for Auto sequence in Quad mode display screen.
. VIDEO LOSS SKIP : With Video Loss Skip [ON], channels without video input signals are automatically
skipped and only channels with video input are displayed.
Chapter 5. Conguration
Chapter 5. Conguration