3. Select TV using the
SOURCE
.
4. Select a desired TV channel.
Is weak signal causing poor reception?
Purchase and install a signal amplifier for better reception.
4. Connecting DVD/DTV Set Top Box
Connect to the DVD/DTVSet Top Box input if the device has a DVD/DTV connector.
You can watch Component simply by hooking up the Component with the monitor as long as the power is
on.
1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the
R-AUDIO-L
port of the monitor.
2. Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the P
R, PB,Y input ports using a
component video cable (P
R, PB,Y).
3. Select Component using the
SOURCE
.
5. Connecting HDMI
You cannot connect a PC to the
HDMI IN
terminal.
1. Input devices such as digital DVD are connected to the
HDMI IN
terminal of the monitor using the
HDMI cable.
To Next Page
Loading...
