DVI IN port
: Connect the DVI Cable to the DVI IN port on the
back of your monitor. (SOURCE: Digital)
RGB IN port
:Connect the signal cable to the RGB IN port on
the back of your monitor. (SOURCE: Analog)
Kensington Lock
: The Kensington lock is a device used to
physically fix the system to something when using it in a public
place. (The locking device has to be purchased separately.)
For using a locking device, contact the place of purchase.
Stand Stopper
: Remove the fixing pin on the stand to lift the
monitor up and down.
To Next Page
Loading...
