Samsung SyncMaster 400DXn - Page 144

This is used to make up for the weak RGB signal transmitted by a long signal cable.
(Available in PC, BNC mode only)
1) Signal Balance
[MENU]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
Selects either On or Off with the signal control.
2) Signal Control
[MENU]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[< / >]
→
[ENTER]
A
djusts the Gain and Sharpness manually.
Size
[MENU]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
The Size can be switched.
1) 16:9
2) 4:3
PIP Picture
[MENU]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
→
[< / >]
→
[ENTER]
Adjusts the PIP Screen Settings.
1) Contrast
A
djusts the Contrast of the PIP window on the screen.
2) Brightness
A
djusts the Brightness of the PIP window on the screen.
3) Sharpness
A
djusts the difference between the lightest and darkest areas of the PIP window.
4) Color
A
djusts the Color of the PIP window on the screen.
5) Tint
A
dds a natural tone to the PIP window.
Y
ou can view a picture from AV, S-Video through the PIP screen in PC, BNC and DVI mode.
Operates only if the video signal is NTSC.
Available Modes: PIP ON
Picture [ AV / S-Video / Component / HDMI Mode]
Available Modes
PC / BNC / DVI
AV
S-Video
Component
HDMI
MagicNet
Mode
[MENU]
→
[
∧
/
∨
]
→
[ENTER]
→
[ENTER]
→
[
∧
/
∨
]
→
[ENTER]
The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are
preset at the factory.
Dynamic, Standard, Movie, or Custom can be activated.
1) Dynamic