→ , → ENTER
Name the input device
connected to the input jacks to make your input source selection
easier.
1. PC
2. DVI
3. AV
4. HDMI
Note
• When connecting a PC
to the HDMI or DVI terminal, set Edit Name to PC. In other cases,
set Edit Name to AV. However, since 640x480, 720P (1280x720), and 1080p (1920x1080)
are common signals for AV and PC, make sure to set the Edit Name in accordance with
the input signal.
• The Picture menu changes depending on the input signal and Edit Name.
Picture [PC / DVI / MagicInfo Mode]
Available Modes
•
PC / DVI
•
AV
•
HDMI
•
MagicInfo
•
TV
Note
• The TV menu is available when a TV tuner box is installed.
•
MX-2 model can use MagicInfo menu when mounted Network box.
MagicBright
MENU → → ENTER → → ENTER →
Adjusting the LCD Display
To Next Page
Loading...
