SyncMaster 710T / 910T (Option)
(The configuration at the back of the monitor may vary from product to product.)
1. Power port
Connect the power cord for your monitor to the power port on the back
of the monitor.
2. DVI port
Connect the DVI Cable to the DVI Port on the back of your Monitor.
3. D-sub 15-pin port
Connect the signal cable to the 15-pin, D-sub connector on the back
of your monitor.
4. Power on/off Switch
Use this button for turn the monitor on and off.
See Connecting the Monitor for further information regarding cable connections.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General