Installation
Clean
Oth er
When not used for extended periods of time, set your computer to DPMS. If
using a screen saver, set it to the active screen mode.
z
If the size of your monitor is small, or if the same image is present for long
periods of time, you may see afterimages due to damage to the
fluorescent substance on the inside of the CDT.
Do not use a damaged or loose plug.
z
This may cause an electric shock or fire.
Do not p ul l the plug out by the wire nor touc h th e plug with we t
hands.
z
This may cause an electric shock or fire.
Use only a proper ly grounded plug and receptacle.
z
An improper ground may cause electric shock or equipment
damage.
Do not excessively bend the plug and wire nor place heavy objects
upon them, whic h could cause damage.
z
Failure to do so may cause an electric shock or fire.
Disconnect the plug from the outlet during storms or lightening or
if it is no t us ed for a long period o f time.
z
Failure to do so may cause an electric shock or fire.
Do not connect too many extension cords or plugs to an outlet.
z
This may cause a fire.
To Next Page
Loading...
