Front
MENU button [MENU/ ]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
Customized Key[ ]
You can customize key assignment for the Custom button according to
your preferences.
Note
You can configure the customized key for a required function via Setup >
Customized Key.
Brightness button [ ]
When OSD is not on the screen, push the button to adjust brightness.
Adjust buttons [ ]
These buttons allow you to adjust items in the menu.
[ ] Button / [ ] Enter button
Activates a highlighted menu item.
Push the '
/ ', then selects the video signal while the OSD is off. (When
the / button is pressed to change the input mode, a message ap-
pears in the upper left of the screen displaying the current mode -- analog
or digital input signal.)
Note
If you select the digital mode, you must connect your monitor to the graphic
card's DVI port using the DVI cable.
Introduction
To Next Page
Loading...
