More Information 6-9
6-9 Specifications
Design and specifications are subject to change without prior notice.
Class B (Information Communication equipment for residential use)
This device is registered for EMC requirements for home use (Class B). It can be used in all areas. (Class B equipment
emits less electromagnetic waves than Class A equipment.)
MODEL NAME S22A300B
Panel Size 21.5 inches (54 cm)
Display area 476.64 mm (H) x 268.11 mm (V)
Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V)
Synchroniza-
tion
Horizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color 16.7 M
Resolution Optimum resolution 1920x1080 @ 60 Hz
Maximum resolution 1920x1080 @ 60 Hz
Input Signal, Terminated
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock 164MHz (Analog,Digital)
Power Supply This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
Signal Cable 15pin-to-15pin D-sub cable, Detachable
DVI-D to DVI-D connector, Detachable
Dimensions (WxHxD) / Weight 512 x 311 x 53 mm (20.2 x 12.2 x 2.1 inches) (Without Stand)
512 x 385 x 197 mm (20.2 x 15.2 x 7.8 inches) (With Stand) / 3.0 kg (6.6 lbs)
Environmen-
tal consider-
ations
Operating Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Tilt 0°( ±2°) ~20°( ±2°)
To Next Page
Loading...
